Cisco Catalyst 3750-X - Page 1420

Index
IN-44
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-21521-01
RFC (continued)
1166, IP addresses 42-7
1253, OSPF 42-25
1267, BGP 42-43
1305, NTP 7-2
1587, NSSAs 42-26
1757, RMON 33-2
1771, BGP 42-43
1901, SNMPv2C 35-2
1902 to 1907, SNMPv2 35-2
2236, IP multicast and IGMP 26-2
2273-2275, SNMPv3 35-2
RFC 5176 Compliance 10-20
RIP
advertisements
42-20
authentication 42-23
configuring 42-21
default configuration 42-21
described 42-20
for IPv6 43-7
hop counts 42-20
split horizon 42-23
summary addresses 42-24
support for 1-14
RMON
default configuration
33-3
displaying status 33-6
enabling alarms and events 33-3
groups supported 33-2
overview 33-1
statistics
collecting group Ethernet
33-5
collecting group history 33-5
support for 1-16
root guard
described
22-10
enabling 22-18
support for 1-8
root switch
MSTP
21-18
STP 20-15
route calculation timers, OSPF 42-33
route dampening, BGP 42-62
routed packets, ACLs on 37-40
routed ports
configuring
42-5
defined 13-4
in switch clusters 6-8
IP addresses on 13-37, 42-5
route-map command 42-99
route maps
BGP
42-54
policy-based routing 42-97
router ACLs
defined
37-2
types of 37-4
route reflectors, BGP 42-61
router ID, OSPF 42-34
route selection, BGP 42-52
route summarization, OSPF 42-32
route targets, VPN 42-77
routing
default
42-3
dynamic 42-3
redistribution of information 42-94
static 42-3
routing domain confederation, BGP 42-61
Routing Information Protocol
See RIP
routing protocol administrative distances
42-92
RPS
See Cisco Redundant Power System 2300
RPS 2300
See Cisco Redundant Power System 2300