Cisco Catalyst 3750-X - Page 29

Contents
xxix
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-21521-01
Setting the Message Display Destination Device 34-5
Synchronizing Log Messages 34-6
Enabling and Disabling Time Stamps on Log Messages 34-8
Enabling and Disabling Sequence Numbers in Log Messages 34-8
Defining the Message Severity Level 34-9
Limiting Syslog Messages Sent to the History Table and to SNMP 34-10
Enabling the Configuration-Change Logger 34-11
Configuring UNIX Syslog Servers 34-12
Logging Messages to a UNIX Syslog Daemon 34-12
Configuring the UNIX System Logging Facility 34-13
Displaying the Logging Configuration 34-14
CHAPTER 35 Configuring SNMP 35-1
Understanding SNMP 35-1
SNMP Versions 35-2
SNMP Manager Functions 35-3
SNMP Agent Functions 35-4
SNMP Community Strings 35-4
Using SNMP to Access MIB Variables 35-4
SNMP Notifications 35-5
SNMP ifIndex MIB Object Values 35-5
Configuring SNMP 35-6
Default SNMP Configuration 35-6
SNMP Configuration Guidelines 35-7
Disabling the SNMP Agent 35-7
Configuring Community Strings 35-8
Configuring SNMP Groups and Users 35-9
Configuring SNMP Notifications 35-12
Setting the CPU Threshold Notification Types and Values 35-16
Setting the Agent Contact and Location Information 35-16
Limiting TFTP Servers Used Through SNMP 35-17
SNMP Examples 35-18
Displaying SNMP Status 35-19
CHAPTER 36 Configuring Embedded Event Manager 36-1
Understanding Embedded Event Manager 36-1
Event Detectors 36-3
Embedded Event Manager Actions 36-4
Embedded Event Manager Policies 36-4