Cisco Catalyst 3750-X

Contents
xxxi
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-21521-01
Configuring VLAN Maps 37-31
VLAN Map Configuration Guidelines 37-31
Creating a VLAN Map 37-32
Examples of ACLs and VLAN Maps 37-33
Applying a VLAN Map to a VLAN 37-35
Using VLAN Maps in Your Network 37-35
Wiring Closet Configuration 37-35
Denying Access to a Server on Another a VLAN 37-36
Using VLAN Maps with Router ACLs 37-37
VLAN Maps and Router ACL Configuration Guidelines 37-38
Examples of Router ACLs and VLAN Maps Applied to VLANs 37-39
ACLs and Switched Packets 37-39
ACLs and Bridged Packets 37-39
ACLs and Routed Packets 37-40
ACLs and Multicast Packets 37-41
Displaying IPv4 ACL Configuration 37-41
CHAPTER 38 Configuring IPv6 ACLs 38-1
Understanding IPv6 ACLs 38-2
Supported ACL Features 38-2
IPv6 ACL Limitations 38-3
IPv6 ACLs and Switch Stacks 38-3
Configuring IPv6 ACLs 38-4
Default IPv6 ACL Configuration 38-4
Interaction with Other Features and Switches 38-4
Creating IPv6 ACLs 38-5
Applying an IPv6 ACL to an Interface 38-7
Displaying IPv6 ACLs 38-8
CHAPTER 39 Configuring QoS 39-1
Understanding QoS 39-2
Basic QoS Model 39-4
Classification 39-5
Classification Based on QoS ACLs 39-7
Classification Based on Class Maps and Policy Maps 39-8
Policing and Marking 39-9
Policing on Physical Ports 39-10
Policing on SVIs 39-11
Mapping Tables 39-13