Cisco Catalyst 3750-X

Contents
ix
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-21521-01
CHAPTER 8 Configuring SDM Templates 8-1
Understanding the SDM Templates 8-1
Dual IPv4 and IPv6 SDM Templates 8-2
SDM Templates and Switch Stacks 8-3
Configuring the Switch SDM Template 8-4
Default SDM Template 8-4
SDM Template Configuration Guidelines 8-4
Setting the SDM Template 8-5
Displaying the SDM Templates 8-6
CHAPTER 9 Configuring Catalyst 3750-X StackPower 9-1
Understanding StackPower 9-1
StackPower Modes 9-2
Power Priority 9-3
Load Shedding 9-3
Immediate Load Shedding Example 9-4
Configuring Stack Power 9-6
Configuring Power Stack Parameters 9-6
Configuring Power Stack Switch Power Parameters 9-7
Configuring PoE Port Priority 9-8
CHAPTER 10 Configuring Switch-Based Authentication 10-1
Preventing Unauthorized Access to Your Switch 10-1
Protecting Access to Privileged EXEC Commands 10-2
Default Password and Privilege Level Configuration 10-2
Setting or Changing a Static Enable Password 10-3
Protecting Enable and Enable Secret Passwords with Encryption 10-3
Disabling Password Recovery 10-5
Setting a Telnet Password for a Terminal Line 10-6
Configuring Username and Password Pairs 10-6
Configuring Multiple Privilege Levels 10-7
Setting the Privilege Level for a Command 10-8
Changing the Default Privilege Level for Lines 10-9
Logging into and Exiting a Privilege Level 10-9
Controlling Switch Access with TACACS+ 10-10
Understanding TACACS+ 10-10
TACACS+ Operation 10-12
Configuring TACACS+ 10-12