Cisco SPA301 User Manual

Provisioning
Updating Profiles and Firmware
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 181
6
Profile Rule
Profile Rule B
Profile Rule C
Profile Rule D
Remote configuration profile rules evaluated in
sequence. Each resync operation can retrieve
multiple files, potentially managed by different
servers.
DHCP Option To Use DHCP options, delimited by commas, used to
retrieve firmware and profiles.
Transport Protocol The transport protocol used to retrieve firmware
and profiles. If none is selected, TFTP is assumed
and the IP address of the TFTP server is obtained
from the DHCP server.
Log Resync Request Msg The message sent to the syslog server at the start
of a resync attempt. The default value is:
$PN $MAC –
Requesting resync $SCHEME://
$SERVIP:$PORT$PATH
Log Resync Success Msg The syslog message issued upon successful
completion of a resync attempt. The default value
is:
$PN $MAC –Successful resync $SCHEME://
$SERVIP:$PORT$PATH -- $ERR.
Log Resync Failure Msg The syslog message that is issued after a failed
resync attempt. The default value is:
$PN $MAC – Resyncfailed: $ERR.
Report Rule The device provides a mechanism for reporting its
current internal configuration to the provisioning
server. The URL in this field specifies the
destination for a report and can include an
encryption key.
HTTP Report Method The HTTP method used when the server invokes
the phone to send a configuration file report using
the HTTP protocol. Choose post or put.
User Configurable
Resync
Allows a user resynch the phone from the IP phone
screen.
Parameter Description

Cisco SPA301 Specifications

General

Brand	Cisco
Model	SPA301
Category	IP Phone
Language	English