Provisioning
Updating Profiles and Firmware
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 182
6
Report Rule The IP phone provides a mechanism for reporting
its current internal configuration to the provisioning
server. The URL in this field specifies the
destination for a report and can include an
encryption key.
Beginning with firmware version 7.5.2b, the IP
phone has the capability to do a delta configuration
report and a status report. The phone reports the
status data if the [--status] keyword is defined.
Both the status report rule and configuration report
rule can be configured in the parameter
<Report_Rule>. These two report rules should be
separated with a semi-colon.
If the [--status] keyword or the status report file
path is missing, the phone will not report the status
data.
For example, if the following is configured:
http://my_http_server/config-525.xml
the phone will report the configuration data to
http://my_http_server/config-525.xml.
If the following is configured:
[--status]http://my_http_server/status-525.xml
the phone will report the status data to http://
my_http_server/config-525.xml.
If the following is configured:
[--delta]http://my_http_server/config-525.xml;
[--status]http://my_http_server/status-525.xml
the phone will report the delta configuration data to
http://my_http_server/config-525.xml and the
status data to http://my_http_server/status-
525.xml.
User Configurable
Resync
Allows a user resynch the phone from the IP phone
screen.
Parameter Description
To Next Page
Loading...
