Cisco SPA301 User Manual

Provisioning
Updating Profiles and Firmware
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 184
6
Parameter Description
Upgrade Enable Allows firmware update operations independent of
resync actions. Defaults to yes.
Upgrade Error Retry
Delay
The interval applied in the event of an upgrade
failure. The firmware upgrade error timer activates
after a failed firmware upgrade attempt and is
initialized with this value. The next firmware
upgrade attempt occurs when this timer counts
down to zero. The default is 3600 seconds.
Downgrade Rev Limit Enforces a lower limit on the acceptable firmware
version number during an upgrade or downgrade.
The device does not complete a firmware upgrade
operation unless the firmware version is greater
than or equal to this parameter. For example:
7.4.8
The default is (empty).
Upgrade Rule A firmware upgrade script that defines upgrade
conditions and associated firmware URLs. It uses
the same syntax as Profile Rule. (See Manually
Provisioning a Phone from the Keypad for the
Upgrade Rule syntax.) The default is (empty).
Log Upgrade Request
Msg
Syslog message issued at the start of a firmware
upgrade attempt. The default is
$PN $MAC -- Requesting upgrade
$SCHEME://$SERVIP:$PORT$PATH
Log Upgrade Success
Msg
Syslog message issued after a firmware upgrade
attempt completes successfully. The default is
$PN $MAC -- Successful upgrade
$SCHEME://$SERVIP:$PORT$PATH -- $ERR
Log Upgrade Failure Msg Syslog message issued after a failed firmware
upgrade attempt. The default is
$PN $MAC -- Upgrade failed: $ERR.
License Keys This field is not used.

Cisco SPA301 Specifications

General

Brand	Cisco
Model	SPA301
Category	IP Phone
Language	English