Configuring Regional Parameters and Supplementary Services
Configuring Supplementary Services (Star Codes)
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 200
7
• Call Forward All Act (*72)—Call forwards all inbound calls. Applies to
primary extension only.
• Call Forward All Deact (*73)—Cancels call forward all. Applies to primary
extension only.0
• Call Forward Busy Act (*90)—Call forwards on busy. Applies to primary
extension only.
• Call Forward Busy Deact (*91)—Cancels call forward on busy. Applies to
primary extension only.
• Call Forward No Answer Act (*92)—Call forwards if no answer. Applies to
primary extension only.
• Call Forward No Answer Deact (*93)—Cancels call forward no answer.
Applies to primary extension only.
• CW Act (*56)—Enables call waiting. For example, if call waiting is turned off
globally, this star code will turn on call waiting until the CW Deact code is
entered.
• CW Deact (*57)—Deactivates call waiting. For example, if call waiting is
turned on globally, this star code deactivates call waiting until the CW Act
code is entered.
• CW Per Call Act (*71)—Enables call waiting for a single call. For example, if
call waiting is turned off globally, this star code will turn on call waiting for
that call.
• CW Per Call Deact (*70)—Deactivates call waiting for a single call. For
example, if call waiting is turned on globally, this star code deactivates call
waiting for that call.
• Block CID Act (*67)—Blocks caller ID on all outbound calls. Applies to all
extensions.
• Block CID Deact (*68)—Deactivates caller ID blocking on outbound calls.
Applies to all extensions.
• Block CID Per Call (*81)—Blocks caller ID on the next outbound call (on the
current call appearance only).
• Block CID Per Call Deact (*82)—Deactivates caller ID blocking on the next
outbound call (on the current call appearance only).
• Block ANC Act—Blocks anonymous calls. Applies to all extensions.
To Next Page
Loading...
Need help?
General
