Cisco SPA301 User Manual

Cisco SPA IP Phone Field Reference
Regional Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 275
A
Reorder Tone Played when an outbound call has failed or after
the far end hangs up during an established call.
Reorder Tone is played automatically when <Dial
Tone> or any of its alternatives times out.
Defaults to 480@-19,620@-19;10(.25/.25/1+2).
Off Hook Warning Tone Played when the caller has not properly placed
the handset on the cradle. Off Hook Warning Tone
is played when Reorder Tone times out.
Defaults to 480@10,620@0;10(.125/.125/1+2).
Ring Back Tone Played during an outbound call when the far end
is ringing.
Defaults to 440@-19,480@-19;*(2/4/1+2).
Call Waiting Tone Played when a call is waiting. Defaults to
440@-10;30(.3/9.7/1)
Confirm Tone Brief tone to notify the user that the last input
value has been accepted.
Defaults to 600@-16; 1(.25/.25/1).
SIT1 Tone Alternative to the Reorder Tone played when an
error occurs as a caller makes an outbound call.
The RSC to trigger this tone is configurable on
theIP phone screen.
Defaults to 985@-16,1428@-16,1777@-16;20(.380/
0/1,.380/0/2,.380/0/3,0/4/0).
SIT2 Tone Alternative to the Reorder Tone played when an
error occurs as a caller makes an outbound call.
The RSC to trigger this tone is configurable on the
IP phone screen.
Defaults to 914@-16,1371@-16,1777@-16;20(.274/
0/1,.274/0/2,.380/0/3,0/4/0).
Parameter Description

Cisco SPA301 Specifications

General

Brand	Cisco
Model	SPA301
Category	IP Phone
Language	English