Cisco SPA301 User Manual

Cisco SPA IP Phone Field Reference
Regional Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 277
A
Page Tone Specifies the tone transmitted when the paging
feature is enabled.
Defaults to 600@-16;.3(.05/0.05/1).
Alert Tone Played when an alert occurs.
Defaults to 600@-19;.2(.05/0.05/1).
System Beep Audible notification tone played when a system
error occurs.
Defaults to 600@-16;.1(.05/0.05/1).
NOTE Applies to Cisco SPA525G or
Cisco SPA525G2
or Cisco WIP310 only.
Call Pickup Tone This field provides the ability to configure an
audio indication for call pickup. The call pickup
tone is the tone to play when the BLF button is
configured and there is an incoming alert on the
button. The default value for this parameter is
440@-10;30(.3/9.7/1), which is the same as the call
waiting tone.
This feature appears as follows in the phone
configuration file:
<Call_Pickup_Tone ua="na">440@-10;30(.3/9.7/
1)</Call_Pickup_Tone>
Parameter Description

Cisco SPA301 Specifications

General

Brand	Cisco
Model	SPA301
Category	IP Phone
Language	English