Cisco SPA IP Phone Field Reference
Ext Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 336
A
Auto Ans Page on Active
Call
In conjunction with the global Auto Answer Page
parameter (found in the Phone tab), this parameter
determines the behavior of the phone when a
page call arrives.
When set to no, page calls are not auto answered
(even if the phone is idle), regardless of the value
of the global Auto Answer Page setting in the
Phone tab. When the global Auto Answer Page
parameter is set to yes, whether page calls are
auto answered or not during an active call
depends on the per line Auto Answer Page
setting (this parameter). Both Auto Answer Page
and Auto Answer Page on Active Call are enabled
by default.
Feature Key Sync Allows the phone to synchronize with the call
server. If yes is selected, if Do Not Disturb or Call
Forwarding settings are changed on the phone,
changes are also made on the server; if changes
are made on the server, they are propagated to
the phone.
This feature is disabled by default.
Parameter Description
To Next Page
Loading...
