D15328.04 SX80 Administrator Guide CE8.2, OCTOBER 2016. www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
57
Cisco TelePresence SX80 Administrator Guide
Step 2: Set the trigger zone
The trigger zone defines the area where presenter tracking is
triggered.
You cannot see the video from the room in the web interface.
An empty gray area represents the camera view and a dashed
rectangle represents the trigger zone. Watch the video
system screen to see the video from the room, together with
the same dashed rectangle as you see in the web interface.
• Adjust the size and location of the trigger zone to cover a
suitable area to detect a presenter's face. The change you
do on the video system's web interface is reflected on the
video system screen.
• The trigger zone must be large enough to detect a
presenter face. Have in mind that people are of different
heights.
Click Save.
Set up the PresenterTrack feature (page 3 of 5)
Web interface: Set the trigger zone.
Video system screen: See the video from the room when you set the trigger zone.
Trigger zone
Trigger zone
The dashed rectangle can be moved
around and re-sized. You can see the
same rectangle on the endpoint screen
when you define the trigger zone.
Stage area
The zoomed out overview image of the
room is represented by a blank box in
the video system's web interface.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
