To Next Page

To Previous Page

Diagnostics and Troubleshooting 3-13

Table 3-2

POST Error Messages

continued

Error Code Audible Beeps Probable Source of Problem Recommended Action

1724-Slot x Drive

Array – Physical

Drive Position

Change(s) Detected –

Logical drive

configuration has

automatically been

updated

None Logical drive configuration has

been updated automatically

following physical drive position

changes.

Press F1 to resume.

1726-Slot x Drive

Array – Array

Accelerator Memory

Size Change

Detected

None Indicates array accelerator

configuration has been updated

automatically due to replacement

of array accelerator (or controller)

with one having different

memory size.

Press F1 to resume.

1727-Slot x Drive

Array – New Logical

Drive(s) Attachment

Detected. If more

than 32 logical

drives, this message

will be followed by:

Auto-configuration

failed: Too many

logical drives.

None Controller has detected an

additional array of drives that

were attached when the power

was off. The logical drive

configuration information has

been updated to add the new

logical drives. The maximum

number of logical drives

supported is 32. Additional

logical drives will not be added to

the configuration.

Press F1 to resume.

1730-Fixed Disk 0

does not support

DMA Mode.