DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
112
LLDP
LLDP Global Settings
This window is used to display and configure the global LLDP settings.
To view the following window, click L2 Features > LLDP > LLDP Global Settings, as shown below:
Figure 5-57 LLDP Global Settings Window
The fields that can be configured in LLDP Global Settings are described below:
Parameter Description
LLDP State Select this option to enable or disable the LLDP feature. By default, this is
disabled.
LLDP Forward State Select this option to enable or disable LLDP forward state. When the LLDP State
is disabled and LLDP Forward Sate is enabled, the received LLDPDU packet will
be forwarded.
LLDP Trap State
Select this option to enable or disable the LLDP trap state.
LLDP-MED Trap State
Select this option to enable or disable the LLDP-MED trap state.
Click the Apply button to accept the changes made.
To Next Page
Loading...
