DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
236
The fields that can be configured are described below:
Parameter Description
Type Specifies that the type is Port.
From Port - To Port
Select the range of ports that will be used in this display here.
Click the Find button to display entries in the table based on the information selected.
Click the Refresh button to refresh the counter information displayed in the table.
Click the Clear button clear the counter information displayed in the table based on the information selected.
Click the Clear All button clear all the counter information displayed in the table.
Click the Show Detail button to view more detailed counter information on the specified port.
After clicking the Show Detail button, the following window will appear:
Figure 11-7 Counters (Show Detail) Window
Click the Back button to return to the previous window.
Click the Refresh button to refresh the information displayed in the table.
Mirror Settings
This window is used to display and configure the mirror feature’s settings. The Switch allows users to copy frames
transmitted and received on a port and redirect the copies to another port. Attach a monitoring device to the mirroring
To Next Page
Loading...
