DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
63
DNS Host Settings
This window is used to display and configure the static mapping entry for the host name and the IP address in the host
table.
To view the following window, click Management > DNS > DNS Host Settings, as shown below:
Figure 4-41 DNS Host Settings Window
The fields that can be configured are described below:
Parameter Description
Host Name
Enter the host name of the equipment.
IP Address
Select and enter the IPv4 address of the equipment.
IPv6 Address
Select and enter the IPv6 address of the equipment.
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Clear All button to clear the information entered in all the fields on this page.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
File System
This window is used to view, manage, and configure the Switch file system.
To view the following window, click Management > File System, as shown below:
Figure 4-42 File System Window
To Next Page
Loading...
