DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
125
Static ARP
This window is used to display and configure the static ARP settings.
To view the following window, click L3 Features > ARP > Static ARP, as shown below:
Figure 6-2 Static ARP Window
The fields that can be configured are described below:
Parameter Description
IP Address
Enter the IP address that will be associated with the MAC address here.
Hardware Address
Enter the MAC address that will be associated with the IP address here.
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
ARP Table
This window is used to display and configure the ARP table settings.
To view the following window, click L3 Features > ARP > ARP Table, as shown below:
Figure 6-3 ARP Table Window
The fields that can be configured are described below:
Parameter Description
Interface VLAN Enter the interface VLAN ID used here. This value must be between 1 and 4094.
IP Address
Select and enter the IP address to display here.
To Next Page
Loading...
