DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
62
The fields that can be configured in DNS Global Settings are described below:
Parameter Description
IP Domain Lookup
Select to enable or disable the IP domain lookup state here.
IP Name Server Timeout
Enter the maximum time to wait for a response from a specified name server. This
value is between 1 and 60 seconds.
Click the Apply button to accept the changes made.
DNS Name Server Settings
This window is used to display and configure the IP address of a domain name server.
To view the following window, click Management > DNS > DNS Name Server Settings, as shown below:
Figure 4-40 DNS Name Server Settings Window
The fields that can be configured are described below:
Parameter Description
Name Server IPv4
Select and enter the IPv4 address of the DNS server.
Name Server IPv6
Select and enter the IPv6 address of the DNS server.
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to remove the specified entry.
To Next Page
Loading...
