DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
271
Parameter Description
Discovered Surveillance
Devices
This field displays the number of ONVIF IP cameras and NVRs discovered on the
port. Click the hyperlink (1) to view the group details associated with IP camera or
NVR connected to the port.
Detect Distance Click the Detect button to initiate a cable distance test on the specified port.
Click the Detect All button to initiate a cable distance test on all the ports of the Switch.
Toolbar
Wizard
Click this option to start the Smart Wizard. For more information about the Smart Wizard, refer to Smart Wizard on
page 5.
Tools
Firmware Upgrade & Backup
Firmware Upgrade from HTTP
This window is used to initiate a firmware upgrade from a local PC using HTTP.
To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Upgrade from HTTP, as
shown below:
Figure 14-22 Firmware Upgrade from HTTP Window
The fields that can be configured are described below:
Parameter Description
Source File Click the Browse button and navigate to the firmware file on the local PC here.
This file will be uploaded to the Switch.
Destination File Select the destination where the firmware file will be saved on the Switch here.
Options to choose from are Image 1 and Image 2.
Click the Upgrade button to initiate the firmware upgrade.
To Next Page
Loading...
