DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
129
After selecting the DHCP Client tab, the following page will appear.
Figure 6-8 IPv4 Interface (Edit, DHCP Client) Window
The fields that can be configured are described below:
Parameter Description
DHCP Client Client-ID Enter the DHCP Client ID here. The range is from 1 to 4094. This parameter is
used to specify the VLAN interface whose hexadecimal MAC address will be used
as the client ID sent with the discover message.
Class ID String
Enter the class ID string here. This string can be up to 32 characters long. Select
the Hex option to enter the Class ID string in the hexadecimal format. This string
can be up to 64 characters long. This parameter is used to specify the vendor
class identifier used as the value of Option 60 in the DHCP discover message.
Lease
Enter and optionally select the DHCP client lease time here. In the text box, the
lease time, in days, can be entered. The range is from 0 to 10000 days. Hours
and Minutes can also be selected optionally.
Click the Apply button to accept the changes made.
IPv6 Interface
This window is used to display and configure the IPv6 interface settings.
To view the following window, click L3 Features > Interface > IPv6 Interface, as shown below:
Figure 6-9 IPv6 Interface Window
The fields that can be configured in IPv6 Interface are described below:
Parameter Description
Interface VLAN
Enter the VLAN interface ID that will be associated with the IPv6 entry.
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Show Detail button to view and configure more detailed settings for the IPv6 interface entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
To Next Page
Loading...
