D-Link DGS-1250 Series User Manual

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
254
The window above displays a message that the abovementioned configurations need to be changed when access to
the Surveillance Mode is given.
Click the OK button to continue.
Click the Cancel button to return to the Standard Mode.
After successfully switching to the Surveillance Mode on the Web UI of the Switch, the following window will appear.
Figure 13-23 Surveillance Mode 'Congratulations' Message
Click the Yes! I understand button to continue.
Logout
Click this option to log out of the Web UI of the Switch

D-Link DGS-1250 Series Specifications

General

Model	DGS-1250 Series
Layer	Layer 2+
L3 Features	Static Routing
MAC Address Table	16K entries
Humidity	10% to 90% non-condensing
Type	Managed Switch
Ports	24 or 48 ports
Uplink Ports	4 x 10G SFP+
Switching Capacity	176 Gbps
Forwarding Rate	Up to 130.95 Mpps
Management	Web-based GUI, CLI, SNMP
Operating Temperature	0 to 50 °C
Storage Temperature	-40 to 70 °C
PoE Support	Available on some models (PoE/PoE+)