DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
247
Parameter Description
Destination File Enter the filename and path of the configuration file that will be stored on the
TFTP server here. This field can be up to 64 characters long.
Click the Backup button to initiate the configuration file backup.
Certificate & Key Restore & Backup
Certificate & Key Restore from HTTP
This window is used to initiate a certificate and key restore from a local PC using HTTP.
To view the following window, click Tools > Certificate & Key Restore & Backup > Certificate & Key Restore from
HTTP, as shown below:
Figure 13-10 Certificate & Key Restore from HTTP Window
The fields that can be configured are described below:
Parameter Description
Source File Click the Browse button and navigate to the certificate and key file on the local
PC here. This will be uploaded to the Switch.
Destination File Enter the filename and path of the certificate and key file that will be stored on the
Switch here. This field can be up to 64 characters long.
Click the Restore button to initiate the certificate and key restore.
Certificate & Key Restore from TFTP
This window is used to initiate a certificate and key restore from a TFTP server.
To view the following window, click Tools > Certificate & Key Restore & Backup > Certificate & Key Restore from
TFTP, as shown below:
Figure 13-11 Certificate & Key Restore from TFTP Window
The fields that can be configured are described below:
Parameter Description
TFTP Server IP
Select and enter the IP address of the TFTP server here.
To Next Page
Loading...
