DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
172
9. Security
Port Security
802.1X
AAA
RADIUS
IMPB
DHCP Server Screening
ARP Spoofing Prevention
Network Access Authentication
Safeguard Engine
Trusted Host
Traffic Segmentation Settings
Storm Control Settings
DoS Attack Prevention Settings
SSH
SSL
Network Protocol Port Protect Settings
Port Security
Port Security Global Settings
This window is used to display and configure the global port security settings. Port Security is a security feature that
prevents unauthorized computers (with source MAC addresses) unknown to the Switch prior to locking the port (or
ports) from connecting to the Switch's locked ports and gaining access to the network.
To view the following window, click Security > Port Security > Port Security Global Settings, as shown below:
Figure 9-1 Port Security Global Settings Window
The fields that can be configured in Port Security Trap Settings are described below:
Parameter Description
Trap State
Select to enable or disable port security traps on the Switch.
Click the Apply button to accept the changes made.
The fields that can be configured in Port Security Trap Rate Settings are described below:
Parameter Description
Trap Rate
Enter the number of traps per second. The range is from 0 to 1000. The default
value 0 indicates an SNMP trap to be generated for every security violation.
Click the Apply button to accept the changes made.
To Next Page
Loading...
