DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
206
DHCP Server Screening Global Settings
This window is used to display and configure the global DHCP server screening settings.
To view the following window, click Security > DHCP Server Screening > DHCP Server Screening Global
Settings, as shown below:
Figure 9-49 DHCP Server Screening Global Settings Window
The fields that can be configured in Trap Settings are described below:
Parameter Description
Trap State
Select to enable or disable the DHCP server screening trap here.
Click the Apply button to accept the changes made.
The fields that can be configured in Profile Settings are described below:
Parameter Description
Profile Name
Enter the DHCP server screening profile name here. This name can be up to 32
characters long.
Click the Create button to create a new profile.
Click the Binding button to configure the client MAC address in the profile.
Click the Delete button to remove the specified entry.
Click the Delete Profile button to remove the specified profile.
The fields that can be configured in Log Information are described below:
Parameter Description
Log Buffer Entries
Enter the logged buffer entries value here. This value must be between 10 and
1024. By default, this value is 32.
Click the Apply button to accept the changes made.
Click the Clear Log button to clear the log.
To Next Page
Loading...
