DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
4
Logging into the Web UI
To access the Web UI open a standard web browser and enter the IP address of the Switch into the address bar of
the browser and press the ENTER key.
NOTE: The factory default IP address of the Switch is 10.90.90.90 with a subnet mask of 255.0.0.0.
NOTE: The factory default username and password is admin.
Figure 2-1 Displays entering the IP address in Internet Explorer
After pressing the Enter key, the following authentication window should appear, as shown below.
Figure 2-2 Web UI Login Window
Enter the User Name and Password in the corresponding fields and click the Login button.
After clicking the Login button, the Web UI opens.
The management features available in the Web UI of the Switch are explained in the chapters below.
NOTE: The Switch only supports ASCII characters for input values.
To Next Page
Loading...
