DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
223
SSH Server Connection
This window is used to view the SSH server connections table.
To view the following window, click Security > SSH > SSH Server Connection, as shown below:
Figure 9-71 SSH Server Connection Window
SSH User Settings
This window is used to display and configure the SSH user settings.
To view the following window, click Security > SSH > SSH User Settings, as shown below:
Figure 9-72 SSH User Settings Window
The fields that can be configured are described below:
Parameter Description
User Name
Enter the SSH user’s username used here. This name can be up to 32 characters
long.
Authentication Method
Select the authentication methods used here. Options to choose from are
Password, Public Key, and Host-based.
Key File After selecting the Public Key or Host-based option as the Authentication
Method, enter the public key here.
Host Name After selecting the Host-based option as the Authentication Method, enter the
host name here.
IPv4 Address After selecting the Host-based option as the Authentication Method, select and
enter the IPv4 address here.
IPv6 Address
After selecting the Host-based option as the Authentication Method, select and
enter the IPv6 address here.
Click the Apply button to accept the changes made.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
To Next Page
Loading...
