D-Link DGS-1250 Series - Step 3 - Add Rule

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
152
Step 3 - Add Rule
MAC
After clicking the MAC radio button and the Next button, the following window will appear.
Figure 8-4 ACL Configuration Wizard (Create, Packet Type, MAC) Window
The fields that can be configured are described below:
Parameter Description
Sequence No.
Enter the ACL rule number here. This value must be between 1 and 65535. Select
Auto Assign to automatically generate an ACL rule number for this entry.
Source
Select and enter the source MAC address information here. Options to choose
from are Any, Host, and MAC.
• When the Any option is selected, any source traffic will be evaluated
according to the conditions of this rule.
• When the Host option is selected, enter the source host MAC address here.
• When the MAC option is selected, the Wildcard option will also be available.
Enter the source MAC address and wildcard value in the spaces provided.
Destination Select and enter the destination MAC address information here. Options to
choose from are Any, Host, and MAC.
• When the Any option is selected, any destination traffic will be evaluated
according to the conditions of this rule.
• When the Host option is selected, enter the destination host MAC address
here.
• When the MAC option is selected, the Wildcard option will also be available.
Enter the destination MAC address and wildcard value in the spaces
provided.