DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
124
6. Layer 3 Features
ARP
Gratuitous ARP
IPv6 Neighbor
Interface
IPv4 Static/Default Route
IPv4 Route Table
IPv6 Static/Default Route
IPv6 Route Table
IP Multicast Routing Protocol
ARP
ARP Aging Time
This window is used to display and configure the ARP aging time settings.
To view the following window, click L3 Features > ARP > ARP Aging Time, as shown below:
Figure 6-1 ARP Aging Time Window
The fields that can be configured are described below:
Parameter Description
Timeout
After click the Edit button, enter the ARP aging timeout value here. The range is
from 0 to 65535. If this is 0, entries will never timeout.
Click the Edit button to re-configure the specific entry.
Click the Apply button to accept the changes made.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
To Next Page
Loading...
