DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
239
12. Green
Power Saving
EEE
Power Saving
This window is used to display and configure the power saving settings of the Switch.
To view the following window, click Green > Power Saving, as shown below:
Figure 12-1 Power Saving Global Settings Window
The fields that can be configured in Power Saving Global Settings are described below:
Parameter Description
Link Detection Power Saving Select to enable or disable the link detection power saving function here. When
enabled, a port that has a link down status will be turned off to save power to the
Switch. This will not affect the port’s capabilities when the port status is link up.
Length Detection Power
Saving
Select to enable or disable the cable length detection power saving function here.
This feature will allow the Switch to automatically detect the cable length
connected to the port and increase or reduce the required power to this port
accordingly to save power.
Scheduled Port-shutdown
Power Saving
Select to enable or disable the scheduled port-shutdown power saving function
here.
Scheduled Hibernation
Power Saving
Select to enable or disable the scheduled hibernation power saving function here.
Scheduled Dim-LED Power
Saving
Select to enable or disable the scheduled dimming of LEDs to save power
function here.
Administrative Dim-LED
Select this option to enable or disable the port LED function.
Click the Apply button to accept the changes made.
The fields that can be configured in Time Range Settings are described below:
Parameter Description
Type
Select the power saving type here. Options to choose from are:
• Dim-LED - Specifies to add or delete a time range profile for the dim LED
schedule. When the schedule is up, all the port LEDs are turned off.
To Next Page
Loading...
