DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
163
Parameter Description
Time Range Enter the name of the time range profile that will be used in this ACL rule here.
This name can be up to 32 characters long.
Click the Apply button to accept the changes made.
Click the Back button to discard the changes made and return to the previous page.
Extended IP ACL
After selecting an Extended IP ACL and clicking the Add Rule button, the following page will appear.
Figure 8-12 Extended IP ACL (Add Rule) Window
The fields that can be configured are described below:
Parameter Description
Sequence No.
Enter the sequence number of this ACL rule here. The range is from 1 to 65535. If
this value is not specified, the system will automatically generate an ACL rule
number for this entry.
Action Select the action that this rule will take here. Options to choose from are Permit
and Deny.
Protocol Type
Select the protocol type option here. Options to choose from are TCP, UDP,
ICMP, EIGRP (88), ESP (50), GRE (47), IGMP (2), OSPF (89), PIM (103), VRRP
(112), IP-in-IP (94), PCP (108), Protocol ID, and None.
• Value - The protocol ID can also manually be entered here. The range is
from 0 to 255.
• Fragments - Select this option to include packet fragment filtering.
Source Select and enter the source IP information here. Options to choose from are Any,
Host, and IP.
To Next Page
Loading...
