DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
275
Save
Save Configuration
This window is used to save the running configuration to the start-up configuration. This is to prevent the loss of
configuration in the event of a power failure.
To view the following window, click Save > Save Configuration, as shown below:
Figure 14-29 Save Configuration Window
The fields that can be configured are described below:
Parameter Description
File Path
Select the destination where the configuration will be saved here. Options to
choose from are startup-config, Configuration 1, and Configuration 2.
Click the Apply button to save the configuration.
To Next Page
Loading...
