DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
234
Interface Counters
This window is used to view the interface counter information.
To view the following window, click Monitoring > Statistics > Interface Counters, as shown below:
Figure 11-4 Interface Counters (Port) Window
The fields that can be configured are described below:
Parameter Description
Type Specifies that the type is Port.
From Port - To Port
Select the range of ports that will be used in this display here.
Click the Find button to display entries in the table based on the information selected.
Click the Refresh button to refresh the information displayed in the table.
Click the Show Errors button to view more detailed error information on the specified port.
To Next Page
Loading...
