DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
215
CPU Protect Type
This window is used to display and configure the CPU protection type settings.
To view the following window, click Security > Safeguard Engine > CPU Protect Type, as shown below:
Figure 9-60 CPU Protect Type Window
The fields that can be configured in CPU Protect Type are described below:
Parameter Description
Protocol Name
Select the protocol name option here.
Rate Limit
Enter the rate limit value used here. This value must be between 0 and 1024
packets per second. Tick the No Limit option to disable the rate limit.
Click the Apply button to accept the changes made.
The fields that can be configured in Protect Type Information are described below:
Parameter Description
Type Select the protocol type here. After selecting the protocol type, the Rate Limit
assigned to the protocol type will be displayed.
Click the Find button to locate a specific entry based on the information entered.
Trusted Host
This window is used to display and configure the trusted host settings.
To view the following window, click Security > Trusted Host, as shown below:
Figure 9-61 Trusted Host Window
To Next Page
Loading...
