DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
127
IPv6 Neighbor
This window is used to display and configure the IPv6 neighbor settings.
To view the following window, click L3 Features > IPv6 Neighbor, as shown below:
Figure 6-5 IPv6 Neighbor Window
The fields that can be configured are described below:
Parameter Description
Interface VLAN
Enter the VLAN interface ID here.
IPv6 Address
Enter the IPv6 address.
MAC Address
Enter the MAC address.
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Clear button to clear all the dynamic information for the specific interface.
Click the Clear All button to clear all the dynamic IPv6 neighbor information in this table.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Interface
IPv4 Interface
This window is used to display and configure the IPv4 interface settings.
To view the following window, click L3 Features > Interface > IPv4 Interface, as shown below:
Figure 6-6 IPv4 Interface Window
To Next Page
Loading...
