DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
141
CoS to Queue Mapping
This window is used to display and configure the CoS-to-Queue mapping settings.
To view the following window, click QoS > Basic Settings > CoS to Queue Mapping, as shown below:
Figure 7-4 CoS to Queue Mapping Window
The fields that can be configured are described below:
Parameter Description
Queue ID Select the queue ID that will be mapped to the corresponding CoS value. Options
to choose from are 0 to 7.
Click the Apply button to accept the changes made.
Port Rate Limiting
This window is used to display and configure the port rate limiting settings.
To view the following window, click QoS > Basic Settings > Port Rate Limiting, as shown below:
Figure 7-5 Port Rate Limiting Window
To Next Page
Loading...
