DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
147
Policy Map
This window is used to display and configure the policy map settings.
To view the following window, click QoS > Advanced Settings > Policy Map, as shown below:
Figure 7-12 Policy Map Window
The fields that can be configured for Create/Delete Policy Map are described below:
Parameter Description
Policy Map Name Enter the name of the policy map that will be created here. This name can be up
to 32 characters long.
Click the Apply button to accept the changes made.
The fields that can be configured for Traffic Policy are described below:
Parameter Description
Policy Map Name
Enter the policy map name here. This name can be up to 32 characters long.
Class Map Name
Enter the class map name here. This name can be up to 32 characters long.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
To Next Page
Loading...
