D-Link DGS-1250 Series - Network Access Authentication Global Settings

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
209
The fields that can be configured are described below:
Parameter Description
From Port - To Port
Select the appropriate port range used for the configuration here.
VID
Enter the VLAN ID used here. This value must be between 1 and 4094.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Network Access Authentication Global Settings
This window is used to display and configure the global Network Access Authentication settings.
To view the following window, click Security > Network Access Authentication > Network Access Authentication
Global Settings, as shown below:
Figure 9-54 Network Access Authentication Global Settings Window
The fields that can be configured in User Information are described below:
Parameter Description
User Name
Enter the user name used here. This name can be up to 32 characters long.
VID
Enter the VLAN ID used here.
Password Type Specifies that the password type is Plain Text.
Password
Enter the password used here. This can be up to 32 characters long.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.