DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
207
After clicking the Binding button, the following window will appear:
Figure 9-50 Bind Client MAC Window
The fields that can be configured are described below:
Parameter Description
Client MAC
Enter the MAC address used here.
Click the Apply button to accept the changes made.
DHCP Server Screening Port Settings
This window is used to display and configure the DHCP server screening port settings.
To view the following window, click Security > DHCP Server Screening > DHCP Server Screening Port Settings,
as shown below:
Figure 9-51 DHCP Server Screening Port Settings Window
The fields that can be configured are described below:
Parameter Description
From Port - To Port
Select the appropriate port range used for the configuration here.
State
Select to enable or disable the DHCP server screening function on the port(s)
specified.
Server IP
Enter the DHCP server IP address here.
Profile Name
Enter the DHCP server screening profile that will be used for the port(s) specified
here.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
To Next Page
Loading...
