DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
264
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
The fields that can be configured in the PoE Configuration section are described below:
Parameter Description
From Port / To Port
Select the port range that will be used here.
Time Range
Select the time range schedule that will be applied to the selected port(s) here.
Click the Apply button to accept the changes made.
Click the Delete button to remove the time range schedule from the specified port.
After clicking the icon, the following window will appear:
Figure 14-13 Day and Hour Window
Click the OK button to use the Day and Hour selected.
Management
File System
This window is used to display and configure the file system settings.
To view the following window, click Management > File System, as shown below:
Figure 14-14 File System Window
The fields that can be configured are described below:
Parameter Description
Path
Enter the path string here.
Click the Go button to navigate to the path entered.
Click the Copy button to copy a specific file to the Switch.
To Next Page
Loading...
