D-Link DGS-1250 Series - Poe; Port Security; Safeguard

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
290
Log Description Severity
Parameter Description:
thermal-sensor-descr: The sensor ID and position.
Event Description: Power failed.
Log Message: <power-descr> failed
Parameter Description:
power-descr: The power position and ID.
Critical
Event Description: Power is recovered.
Log Message: <power-descr> back to normal
Parameter Description:
power-descr: The power position and ID.
Critical
Event Description: Press the factory reset button.
Log Message: Factory reset button pressed
Critical
PoE
Log Description Severity
Event Description: Total power usage threshold is exceeded.
Log Message: Usage threshold <percentage> is exceeded
Parameter Description:
percentage: usage threshold
Warning
Event Description: Total power usage threshold is recovered.
Log Message: Usage threshold <percentage> is recovered
Parameter Description:
percentage: usage threshold
Warning
Port Security
Log Description Severity
Event Description: Address full on a port.
Log Message: MAC address <macaddr> causes port security violation on <interface-id>
Parameter Description:
macaddr: The violation MAC address.
interface-id: The interface name.
Warning
Event Description: Address full on system.
Log Message: Limit on system entry number has been exceeded
Warning
Safeguard
Log Description Severity
Event Description: the host enters the mode of exhausted.
Log Message: Safeguard Engine enters EXHAUSTED mode
Warning
Event Description: the host enters the mode of normal.
Log Message: Safeguard Engine enters NORMAL mode
Informational