DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
48
Session Timeout
This window is used to display and configure the session timeout settings. The outgoing session timeout values are
used for Console/Telnet/SSH connections through the CLI of the Switch to the Telnet interface of another switch.
To view the following window, click Management > Session Timeout, as shown below:
Figure 4-20 Session Timeout Window
The fields that can be configured are described below:
Parameter Description
Web Session Timeout Enter the web session timeout value here. The range is from 60 to 36000
seconds. The default value is 180 seconds.
Select the Default option to use the default value.
Console Session Timeout
Enter the console session timeout value here. The range is from 0 to 1439
minutes. Enter 0 to disable the timeout. The default value is 3 minutes.
Select the Default option to use the default value.
Telnet Session Timeout
Enter the Telnet session timeout value here. The range is from 0 to 1439 minutes.
Enter 0 to disable the timeout. The default value is 3 minutes.
Select the Default option to use the default value.
SSH Session Timeout
Enter the SSH session timeout value here. The range is from 0 to 1439 minutes.
Enter 0 to disable the timeout. The default value is 3 minutes.
Select the Default option to use the default value.
Click the Apply button to accept the changes made.
DHCP
Service DHCP
This window is used to display and configure the DHCP service on the Switch.
To view the following window, click Management > DHCP > Service DHCP, as shown below:
Figure 4-21 Service DHCP Window
To Next Page
Loading...
