DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
266
Parameter Description
• Configuration 1 - Specifies to overwrite "Configuration 1" with the source.
• Configuration 2 - Specifies to overwrite "Configuration 2" with the source.
Replace
Specifies to replace the current running configuration with the indicated
configuration file.
Click the Apply button to initiate the copy.
Click the Cancel button the discard the process.
Time
Clock Settings
This window is used to display and configure the time settings on the Switch.
To view the following window, click Time > Clock Settings, as shown below:
Figure 14-17 Clock Settings Window
The fields that can be configured are described below:
Parameter Description
Time (HH:MM:SS)
Enter the current time in hours, minutes, and seconds.
Date (DD/MM/YYYY)
Enter the current day, month, and year to update the system clock.
Click the Apply button to accept the changes made.
To Next Page
Loading...
