D-Link DGS-1250 Series - 13 Toolbar; Save; Save Configuration; Tools

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
242
13. Toolbar
Save
Tools
Wizard
Online Help
Surveillance Mode
Logout
Save
Save Configuration
This window is used to save the running configuration to the start-up configuration. This is to prevent the loss of
configuration in the event of a power failure.
To view the following window, click Save > Save Configuration, as shown below:
Figure 13-1 Save Configuration Window
The fields that can be configured are described below:
Parameter Description
File Path
Select the destination where the configuration will be saved here. Options to
choose from are startup-config, Configuration 1, and Configuration 2.
Click the Apply button to save the configuration.
Tools
Firmware Upgrade & Backup
Firmware Upgrade from HTTP
This window is used to initiate a firmware upgrade from a local PC using HTTP.
To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Upgrade from HTTP, as
shown below:
Figure 13-2 Firmware Upgrade from HTTP Window