DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
243
The fields that can be configured are described below:
Parameter Description
Source File Click the Browse button and navigate to the firmware file on the local PC here.
This file will be uploaded to the Switch.
Destination File
Select the destination where the firmware file will be saved on the Switch here.
Options to choose from are Image 1 and Image 2.
Click the Upgrade button to initiate the firmware upgrade.
Firmware Upgrade from TFTP
This window is used to initiate a firmware upgrade from a TFTP server.
To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Upgrade from TFTP, as
shown below:
Figure 13-3 Firmware Upgrade from TFTP Window
The fields that can be configured are described below:
Parameter Description
TFTP Server IP
Select and enter the IP address of the TFTP server here.
• IPv4 - Specifies to select and enter the IPv4 address of the TFTP server.
• IPv6 - Specifies to select and enter the IPv6 address of the TFTP server.
Source File Enter the filename and path of the firmware file on the TFTP server here. This will
be uploaded to the Switch. This field can be up to 64 characters long.
Destination File
Select the destination where the firmware file will be saved on the Switch here.
Options to choose from are Image 1 and Image 2.
Click the Upgrade button to initiate the firmware upgrade.
Firmware Backup to HTTP
This window is used to initiate a firmware backup to a local PC using HTTP.
To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Backup to HTTP, as shown
below:
Figure 13-4 Firmware Backup to HTTP Window
To Next Page
Loading...
