DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
13
System Information Settings
This window is used to display and configure the system information settings and management interface configuration
settings.
To view the following window, click System > System Information Settings, as shown below:
Figure 3-2 System Information Settings Window
The fields that can be configured in System Information Settings are described below:
Parameter Description
System Name
Enter the system name for the Switch here. This name will identify it in the Switch
network.
System Location
Enter the location description of the Switch here.
System Contact
Enter the contact information for the Switch here.
Click the Apply button to accept the changes made.
Peripheral Settings
This window is used to display and configure the environment trap settings and environment temperature threshold
settings.
To view the following window, click System > Peripheral Settings, as shown below:
Figure 3-3 Peripheral Settings Window
The fields that can be configured in Environment Trap Settings are described below:
Parameter Description
Fan Trap
Select to enable or disable the fan trap state for warning fan event (fan failed or
fan recover).
Power Trap
Select to enable or disable the power trap state for warning power event (power
failed or power recover).
Temperature Trap
Select to enable or disable the temperature trap state for warning temperature
event (temperature thresholds exceeded or temperature recover).
To Next Page
Loading...
