D-Link DGS-1250 Series - Snmp; Ssh; Storm Control; System Log Summary

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
291
SNMP
Log Description Severity
Event Description: SNMP request received with invalid community string.
Log Message: SNMP request received from <ipaddr> with invalid community string
Parameter Description:
ipaddr: The IP address.
Informational
SSH
Log Description Severity
Event Description: The SSH server is enabled.
Log Message: SSH server is enabled
Informational
Event Description: The SSH server is disabled.
Log Message: SSH server is disabled
Informational
Storm Control
Log Description Severity
Event Description: Storm occurrence.
Log Message: <Broadcast | Multicast | Unicast> storm is occurring on <interface-id>
Parameter Description:
Broadcast: Storm is resulted by broadcast packets (DA = FF:FF:FF:FF:FF:FF).
Multicast: Storm is resulted by multicast packets, including unknown L2 multicast, known
L2 multicast, unknown IP multicast and known IP multicast.
Unicast: Storm is resulted by unicast packets, including both known and unknown unicast
packets
interface-id: The interface ID on which a storm is occurring.
Warning
Event Description: Storm cleared.
Log Message: <Broadcast | Multicast | Unicast> storm is cleared on <interface-id>
Parameter Description:
Broadcast: Broadcast storm is cleared.
Multicast: Multicast storm is cleared.
Unicast: Unicast storm (including both known and unknown unicast packets) is cleared.
interface-id: The interface ID on which a storm is cleared.
Informational
Event Description: Port shut down due to a packet storm.
Log Message: <interface-id> is currently shut down due to the <Broadcast | Multicast |
Unicast> storm
Parameter Description:
interface-id: The interface ID on which is error-disabled by storm.
Broadcast: The interface is disabled by broadcast storm.
Multicast: The interface is disabled by multicast storm.
Unicast: The interface is disabled by unicast storm (including both known and unknown
unicast packets).
Warning
System Log Summary
Log Description Severity
Event Description: This log will be generated when system warm start.
Log Message: System warm start
Critical
Event Description: This log will be generated when system cold start.
Log Message: System cold start
Critical