DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
47
Click the Back button to return to the previous window.
Telnet/Web
This window is used to display and configure Telnet and Web settings on the Switch.
To view the following window, click Management > Telnet/Web, as shown below:
Figure 4-19 Telnet/Web Window
The fields that can be configured in Telnet Settings are described below:
Parameter Description
Telnet State
Select to enable or disable the Telnet server feature here.
Port
Enter the TCP port number used for Telnet management of the Switch. The well-
known TCP port for the Telnet protocol is 23. The range is from 1 to 65535.
Click the Apply button to accept the changes made.
The fields that can be configured in Web Settings are described below:
Parameter Description
Web State
Select this option to enable or disable the configuration through the web.
Port Enter the TCP port number used for Web management of the Switch. The well-
known TCP port for the Web protocol is 80. The range is from 1 to 65535.
Click the Apply button to accept the changes made.
To Next Page
Loading...
