DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
159
Parameter Description
Traffic Class
Select and enter the traffic class value here. The range is from 0 to 255.
TCP Flag Tick the appropriate TCP flag option to include the flag in this rule. Options to
choose from are ack, fin, psh, rst, syn, and urg.
This parameter is only available in the protocol type TCP.
Flow Label
Enter the flow label value here. This value must be between 0 and 1048575.
Time Range
Enter the name of the time range profile that will be used in this ACL rule here.
This name can be up to 32 characters long.
Action Select the action that this rule will take here. Options to choose from are Permit
and Deny.
Click the Back button to return to the previous step.
Click the Next button to continue to the next step.
Step 4 - Apply Port
After clicking the Next button, the following window will appear.
Figure 8-7 ACL Configuration Wizard (Create, Port) Window
The fields that can be configured are described below:
Parameter Description
From Port - To Port
Select the appropriate port range used for the configuration here.
Direction Specifies that the In direction is used.
Click the Back button to return to the previous step.
Click the Apply button to accept the changes made and return to the main ACL Wizard window.
To Next Page
Loading...
