DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
78
Parameter Description
Allowed VLAN Range
Enter the allowed VLAN range here.
Clone
Select this option to enable the clone feature.
From Port - To Port
Select the range of ports that will be used in the clone feature here.
Click the Apply button to accept the changes made.
Click the Back button to discard the changes made and return to the previous page.
Port Summary
After selecting the Port Summary tab, the following page will be available.
Figure 5-18 VLAN Interface Port Summary Window
Asymmetric VLAN
This window is used to display and configure the asymmetric VLAN settings.
To view the following window, click L2 Features > VLAN > Asymmetric VLAN, as shown below:
Figure 5-19 Asymmetric VLAN Window
The fields that can be configured are described below:
Parameter Description
Asymmetric VLAN State
Select to enable or disable the asymmetric VLAN feature here.
Click the Apply button to accept the changes made.
To Next Page
Loading...
