DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
29
Time Zone Settings
This window is used to display and configure time zones and Daylight Savings Time settings for SNTP.
To view the following window, click System > Time and SNTP > Time Zone Settings, as shown below:
Figure 3-23 Time Zone Settings Window
The fields that can be configured are described below:
Parameter Description
Summer Time State
Select the summer time setting. Options to choose from are Disabled, Recurring
Setting, and Date Setting.
• Disabled - Select to disable the summer time setting.
• Recurring Setting - Select to configure the summer time that should start
and end on the specified weekday of the specified month.
• Date Setting - Select to configure the summer time that should start and end
on the specified date of the specified month.
Time Zone
Select to specify your local time zone offset from Coordinated Universal Time
(UTC).
To Next Page
Loading...
